For years Marine snipers have been using their coveted bolt-action M40s (A1/2/3/5) to take out enemies all over the world. These rifles are all built by hand at the Marine Corps Precision Weapons Shop (PWS) in Quantico, VA. The Marines at PWS build some of the most accurate sniper rifles in DOD, yet when 9/11 sent the Marines into Iraq and Afghanistan the shortcomings of the new M40A3 were soon apparent. Marines on the front lines needed rifles that were shorter and lighter, had better fields of view, and were quiet. But the weapons procurement timelines in non-special operational forces are long, and what should take months typically takes years. This is where the DARPA XM-3 came in.
Enemy Snipers Take a Toll
When urgent needs statements (UNSs) started coming from the sniper platoons on the front lines, one government agency was quick to respond—the Defense Advanced Research Project Agency, better known as DARPA. In 2003 DARPA became interested in helping the Marine snipers counter insurgent snipers who had been successful in spotting and killing Marine snipers in hide sites. When our nation’s elite snipers are killed by enemy snipers, it tends to get the attention of all groups in DOD, DARPA being no exception.
DARPA looked at the problem from a technology standpoint. What could DARPA do to increase the Marine snipers’ chances of survival while improving their lethality? One project they were working on was a sniper detection system called the Boomerang. In 2004, as this system was being field tested at Camp Lejeune against Marine snipers on Hathcock Range, the Marine Corps’ representative to DARPA, Col Otto Weigl, was on deck watching the Marine snipers fire against the system. The Col noticed an older gentleman getting down in the dirt and talking to the Marines behind the rifles. The man asking the questions was LtCol Norm Chandler USMC (Ret.). He had been responsible for building Hathcock range in the 90s, so he took an interest any time a new technology was tested there. LtCol Chandler had noticed a Marine was having issues with his optics, and he asked what issues they were having in general with their currently issued M40A3s. That day on the range Col Weigl learned about the shortcomings of the Marines’ sniper rifles and equipment.
DARPA gets in bed
I was the SNCOIC of the 2nd Marine Division’s Pre-Sniper course in 2004 when I got a call from LtCol Chandler. I had known him for years and knew his company built some rock-solid rifles. LtCol Chandler told me he had spoken extensively with Col Weigl and that the Col might be able to provide some technological assistance for the next set of units heading out the door. I found it hard to believe that an O-6 would have taken such an interest so I called Col Weigl’s office at the Pentagon. The Col explained what DARPA could and couldn’t do, and asked to arrange a meeting with snipers and some key leadership within the Division. That year DARPA held a small conference with Marine snipers to gather information on equipment and desired improvements. To develop a new program, DARPA decided to do an evaluation of off-the-shelf equipment that could be acquired, deployed, and evaluated.
The conference and evaluation led to many developments. “In mid-2005,” Col Weigl recounts, “DARPA provided a deploying MEU with spotting scopes, laser range finders, clip on night-vision devices for weapons, carbine suppressors and deployed 2 Mirage 1200 counter sniper systems. DARPA also provided night vision and suppressors to the Marine Corps Warfighting Lab’s first distributed operations platoon deployed in Afghanistan.”
The initial equipment DARPA fielded was used in combat on a daily basis. The technical reports and after-action reports provided DARPA with the justification needed to start the M40XM program. Since DARPA had used Iron Brigade Armory to get the equipment to the Marines, they had a great working relationship. The folks at DARPA also understood what a battle-hardened rifle needed, so it was a natural fit for them to select Iron Brigade Armory. In 2005 DARPA contracted IBA to build and test lightweight sniper rifles that incorporated the improvements the snipers desired in combat.
DARPA’s mission was to develop a complete sniper system for both day and night operations. The system had to be lighter and smaller than the existing M40s while having better accuracy, clip-on night vision that did not require a re-zero, better optics, and better stock, and it had to be suppressed.
Getting funding for the project was not an issue. According to Col Weigl, “Funding for the prototypes XM1 through XM3, as well as the 56 full systems was not a problem since there was interest from the DARPA director Tony Tether, SOCOM General Brown, and USMC General Mattis.” The support and funding made it possible to expedite the development and fielding of the systems.
IBA began development of the M40XM1 in early 2005. From the outset they wanted to develop a rifle that was lighter and shorter and that possessed a suppressor and night vision capability. Some of the issues with the Army’s M24 and the Marines’ M40A3s were long barrels, long actions (M24), weaver rails (M24), heavy stocks (M40A3), and fixed power optics. IBA had to look at each issue on the M24 and M40A3 with a critical eye. DARPA wasn’t interested in developing another M40A3 boat anchor. IBA looked at all the parts in a standard Remington 700 action and began working to lighten and modify any factory parts to achieve better results. So what made the XM3 so different? Here are some of the main elements that set them apart:
During the development, IBA went through a total of five configurations before settling on the XM3’s final configuration. The first and most obvious departure from a regular M40A3 was the stock. The Marines who used the M40A1 loved the sleek, low-profile stock. It didn’t weigh much, it was easy to maneuver, and it fit most guys well. The main downside to the McMillian A1 stock was the low comb height—plus the fact that the forend was not wide enough to accept the new in-line night vision mounts. I called McMillian Brothers in Arizona and spoke to Mr. McMillian himself. I explained what the XM program was about and asked if he could take an A1 rear, raise the comb half an inch, and use an A3 forend. He said it wouldn’t be a problem, and they got on it. Within three weeks I had the new A6 (as it was called at the time—it’s now the A1-3) stock at my doorstep. Now the stock problem was solved! IBA bedded the the new A6 onto my existing Chandler rifle and we began putting it through it’s paces. Within a month I had sent the stock to Rikert Engineering in MA to have it modified into a take-down stock. This same stock would eventually end up overseas on a Marine Corps XM-3.
The other major departures from the sniper rifles of the day were in barrel length and contour. The barrel had to be short enough to allow maneuverability yet long enough to deliver a 10” group at 1,000 yards. If the barrel was too heavy, maneuverability would decrease, yet if the barrel was too light it would only be able to shoot a few rounds before the groups started to shift due to barrel temperature. IBA tested a number of barrel lengths, ranging from 16 to 20 inches and in different contours and even a fluted version. Each rifle with a different length was assigned an XM designator starting with XM1 through XM3. In each case, everything on the prototype rifles was kept the same except the barrel. During the final phases of testing it was found that the 18” barrels had no issues keeping up with their longer 20” brethren. The final barrel length was set at 18.5”, and the contour was a modified #7. The straight taper on the barrel was only 2” vs. 4” and the overall diameter at the muzzle was .85” vs. .980”. This helped reduce a lot of the rifle’s weight while not negatively affecting accuracy or effective range. A number of the groups at 1,000 yards were -1 MOA.
Once the final rifle configuration had been settled on, the prototype XM3 was sent to the Naval Surface Warfare Center in Crane, Indiana for testing, safety certification, and a comparison test. The tests conducted at Crane were very scientific. Every round was fired on a fully instrumented range and recorded. The XM3 was tested side by side with the Mk13 Mod 5 and the Mk 11 Mod 0. The XM3 did extremely well during testing.
The time it took IBA to develop and field the XM3 rifle was light years ahead of typical government programs. By the time the first XM3 rifle had been shipped out the door, only 12 months had passed since DARPA had contacted them.
The DARPA XM3 rolls out
You would think with such support the Marines would be chomping at the bit to get these new weapons systems in hand. Despite the interest from Gen Mattis, some Marine program managers at Marine Corps Systems Command (SYSCOM) said there were no requirements for a new sniper rifle and made DARPA jump through numerous hoops. The Marines tested and evaluated the XM3 in Quantico. SYSCOM required an official safety certification from the Navy’s Surface Warfare Center, and once the bureaucratic pushback from SYSCOM, PWS, and unit armory and supply officers was overcome, the systems were sent to the units. In 2006 the Marine Corps started to take delivery of the XM3 sniper weapon system. The system included:
A number of the first units to receive the XM3 were West Coast infantry battalions. Col Weigl had been working with GySgt Ken Sutherby, one of the Corps’ top snipers, to ensure the rifles made a smooth transition into the fleet. GySgt Sutherby was instrumental in ensuring that the sniper platoons who received the XM3s knew how they operated and what they could and could not do. This was the first time the Marines had seen in-line night vision devices that did not require them to be zeroed to a specific rifle. It was also the first time the Marines had variable power scopes and most importantly the first time they were able to shoot their rifles suppressed.
Col Weigl and Norm Chandler, Jr. were on hand at Camp Pendleton when the first shipment of rifles was delivered to I-MEF. As with all IBA rifles the XM3s were test fired and zeroed before leaving the shop. When the Marines cracked open the cases and went to zero the rifles, they were pleasantly surprised that all the rifles were within a ½ MOA of their point of aim. The Marines were able to hit their targets all the way out to 1,000 yards with ease. But that night was when the Marines’ jaws really dropped. After the sun went down, the Marines tossed on the PVS-26 universal Night Sights. Using their prior data, more than 75% of the Marines had first-round hits at 900 yards, fully suppressed!
The Marines loved the fact that the rifle was more compact and lighter and had more capabilities than their existing M40A3s. The rifle was mostly able to keep up accuracy-wise with the longer-barreled M40A3s. Even though the barrel on the XM3 was a full six inches shorter, muzzle velocity was only reduced by 100fps on average. Did this make the rifle less accurate? No. It just meant that, depending on the environment, the rounds sometimes went trans-sonic prior to reaching the 1,000-yard mark.
DARPA XM3 Goes to War
Shortly after I-MEF took receipt of the XM-3s, the first units in II-MEF took receipt of theirs and two additional XM-3’s were built for MCWL (Marine Corps Warfighting Laboratory). The two MCWL XM-3’s had a special low-profile take-down feature built into them. One of these stocks came off my personal Chandler rifle. By mid 2006 there were dozens of XM3s in Iraq quietly killing insurgents. One of the first reports back described a team of three insurgents emplacing an IED about 400 yards away from the team. It was just after midnight when the team shot the first insurgent. The other two had no idea where the shot came from and starting running directly towards the team. The sniper took out the second guy, while the third guy kept running towards the team. The third guy was dropped about 200 yards from the team’s position. There were reports like this coming back from theater monthly.
I thought the Marines themselves could best sum up their thoughts on the XM3:
DARPA XM3 issues
One of the few pitfalls of the XM3 program was that it wasn’t official. Therefore no structured training or maintenance plans were in place or ever implemented. This meant that if one of the rifles went down for whatever reason, its life was over. Although the XM3 could have easily been maintained by the 2112s, SYSCOM wouldn’t officially let them work on the rifles, which reduced their productive lifespan in the hands of the Marine snipers. I know of a few 2112s who would do the right thing and fix any sniper rifle a Marine is using, regardless of what paperwork is or isn’t on file at SYSCOM—but this only goes so far when the official policy gets in the way.
Another issue from a shooter’s point of view was the optic selected for use. The optic was the same one used by the SEALs on their Mk13s, but it was adjusted in MOA. When the XM3s were fielded, the Marines just started switching over to the SSDS with MIL adjustments. The veteran snipers knew MOA adjustments, but not all really understood them since their Unertl 10Xs were single-revolution BDCs. For a new sniper coming out of sniper school who knew mils, it was now necessary to also learn MOA. The scope also lacked the reticle in the first focal plane. This meant the only way to do correct mil readings or moving-target leads was to power the scope to its max. Some of the units used the Nightforces and did great with them, while others never could figure out MOAs and instead put on either old Unertl 10Xs or the new SSDSs.
Most of the XM3s became theater assets, meaning they were left in the combat zones and were transferred from unit to unit. This meant that an incoming Marine sniper was issued the XM3 upon entry into his area of operations. The Marine probably had no prior training and was relying on data someone else had gathered and that he had not confirmed for himself.
Nine years Later
In doing the research for this article I found that most of the XM3s have been sent to the Marine Corps Logistics Base (MCLB) in Albany, Georgia. Had there been a program of record, the 2112s could have worked on the rifles and kept them in service. As it stood when I initially wrote this article the 48 XM3s in Albany were slated for destruction in August of 2012. Four rifles remained in the fleet with the Marines.
The Marines could have done a few things with the XM3s to ensure they continue their service in some way. First, they could have spent end-of-year funds to get the rifles refurbished and upgraded by the manufacturer. This would add 52 more sniper rifles to the inventory, bringing the Marine Corps’ total number of sniper rifles near 1,200. The total cost to have all 52 rifles re-barreled, re-bolted, re-bedded, and upgraded to detachable box magazines would be just over $100,000. Second, the rifles could have been sent back to the manufacturer where any worn parts that would cause safety issues would be replaced, and the rifles would then be sold in the manner that Remington is selling the Army’s old M24s to raise money for the Wounded Warrior Project. The third option would be to have every rifle chopped up and dropped in the dumpster.
To see these fine combat sniper rifles destroyed would be shame. I hope the Marine Corps does the right thing and puts these rifles to use, either in killing insurgents or in raising money for our wounded warriors. I feel personally attached to these rifles as I was involved heavily in their development.
Semper Fi Steve Reichert
8/15/2014: The article above caught the eye of a former Army logistician when it was published by SOF. Thanks to the efforts of Dr. EB, he was able to get the Marine Corps to transfer the XM3’s over to the US Army. The Army then transferred the XM3’s to the Civilian Marksmanship Program (CMP). The CMP will start auctioning off the XM3’s at the end of August 2014. This is the 1st time in history a COMPLETE US Govt issued sniper rifle with documented combat history has been made available to the public.
9/20/2014: The 1st DARPA XM-3 was sold via auction on the CMP’s website. The final price was $16,001.00. It would have been higher had CMP’s website not crashed during the last 4 days of the auction. The rifle went to a firearms accessory company CEO who has done a lot of the Marines over the years.
11/18/2014: The 2nd DARPA XM-3 was sold to yours truly. I had been in contact with CMP for six months on a rather large XM-3 lot purchase, so I had a good idea of what was in the inventory. The folks at CMP were extremely receptive of my request to track down one of the rarest XM-3’s used by the Marine Corps. The Marines had 2 XM-3’s with take-down stocks, and only 1 of the take-down XM-3’s had a fluted barrel. I knew one of those two rifles had the 1st McMillian A6 stock on it (my old personal stock). After cutting a check, the guys at CMP shipped out one of the two MCWL XM-3’s. Upon opening the box, it felt like an old family reunion. The XM-3 with a fluted barrel that I held in my hand had been one of the prototype XM’s that we had tested at Blackwater. It was the only one ever made with flutes. I took the rifle apart to clean it up and upon looking inside the barrel channel I saw “SSGT REICHERT”. When IBA had bedded the 1st McMillian A6 onto my personal rifle, they stamped my rank and name into the stock. Months later IBA asked if I would be willing to switch stocks out so DARPA could have two take-down XM-3’s in their inventory. The stock went onto an XM-3 and off to MCWL. Upon inspecting the gun book, I saw that MCWL had sent the rifle into Ramadi Iraq for one of the the most infamous combat operations in the city. The 1st unit to get the XM-3 did an ok job at keeping the gun book up to date. There were 111 rounds logged in during the rifles 1st few months in the country. I’m still researching the combat history of this rifle; it’s a history that I’m sure is extensive with lots of great stories. More to follow!~
11/21/2014: Took the XM-3 to the range today to ensure she’s zeroed. With Remington factory 175 grain match she consistently printed 1/2 MOA at 102yds. At 302yds I ran some Lapua 185 grain through her, the groups were all 1/2 MOA or less. Two groups were 1/3 MOA. It’s nice to have part of the family so to speak back in the house, and in perfect working order.